Parameters for a component

Key=Value

Description

continue_on_fail=true

Controls what happens when the called party is unavailable (busy/offline). If true, outbound routing continues to be processed. If false - stop processing.

instant_ringback=true

Ringback will not wait for an indication before sending a callback signal to the caller.

ignore_early_media=true

Ignore the early media from the endpoint.

ignore_early_media=ring_ready

Same as ignore_early_media=true , but it also sends SIP 180 to the incoming leg when the first SIP 183 is intercepted.

hangup_after_bridge=true

Controls what happens to the calling party (A) when it is in the bridge state, and the called party (B) hangs up.

If set to true, outbound routing will stop processing, and Leg-A will end when Leg-B ends.

If set to false (default), outgoing routing continues to be processed after Leg-B is completed.

ignore_display_updates=true

Do not send displayed UPDATEs to the call leg (update_display).

call_timeout=20

Specifies how long (in seconds) the endpoint will ring. The default is 60 seconds.

leg_timeout=15

It can only be used inside endpoint parameters.

leg_delay_start=15

Specifies the timeout in seconds before calling a branch. It can only be used inside endpoint parameters.

origination_caller_id_number=911

Sets the initial CallerID number.

sip_renegotiate_codec_on_reinvite=true

Allow changing SDP codec with re-INVITE.